rfid transponder coils C 5315tc document 311 -1 document 311-1 revised 02/19/09 the 5315tc is coilcrafts most rugged and lowest cost antenna coil designed for rfid applications at 125 khz. the wrap-around terminals have large mounting surfaces to ensure excellent board adhesion. the coil is wound on a plastic base, providing great durability and allowing this part to withstand harsh mechanical shock. their robust construction and 125c rating make these parts suitable for use in the most severe environments. they were developed for automotive applications, includ - ing tire pressure monitoring systems. in addition to the standard models shown, coilcraft can design transponder coils to operate at other frequencies. coilcraft designers kit c369 contains four samples each of the standard parts shown. to order, contact coilcraft or visit http://order.coilcraft.com . inductance 2 read matching at 125 khz distance 3 sensitivity 4 capacitor 5 dcr max 6 srf typ 7 part number 1 2% (mh) q min 2 (inches/cm) (mv/t) (pf) (ohms) (khz) 5315tc-374xgl_ 0.37 8 16 / 40.6 8.32 4380 24 7100 5315tc-404xgl_ 0.40 8 17 / 43.2 8.67 4050 25 7300 5315tc-704xgl_ 0.70 12 21 / 53.3 11.43 2320 33 4500 5315tc-904xgl_ 0.90 12 21 / 53.3 13.35 1800 38 3800 5315tc-105xgl_ 1.00 12 23 / 58.4 14.07 1600 40 2500 5315tc-115xgl_ 1.08 13 23 / 58.4 14.65 1500 40 2300 5315tc-205xgl_ 1.97 14 25 / 63.5 21.28 820 70 2300 5315tc-245xgl_ 2.38 12 26 / 66.0 23.97 680 80 2400 5315tc-335xgl_ 3.30 14 27 / 68.6 29.70 490 95 1800 5315tc-415xgl_ 4.15 15 29 / 73.7 34.95 390 103 1260 5315tc-495xgl_ 4.90 15 28 / 71.1 40.00 330 150 1550 5315tc-685xgl_ 6.80 13 30 / 76.2 53.87 240 180 1350 5315tc-715xgl_ 7.10 14 30 / 76.2 55.41 220 176 890 5315tc-725xgl_ 7.20 17 30 / 76.2 56.74 220 165 880 1. when ordering, please specify packaging code: 5315tc-715xgl d packaging: d = 13 machine-ready reel. eia-481 embossed plastic tape (3000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. inductance and q measured using agilent/hp 4192a impedance ana - lyzer at 125 khz. for recommended test procedures, contact coilcraft. 3. read distance measured using the keeloq ? transponder evaluation kit part number dm303005 from microchip. distance was recorded as the voltage across the resonant circuit dropped below 10 mv. 4. sensitivity measured in accordance with coilcraft application note mea - suring sensitivity of transponder coils. 5. matching capacitor value required for parallel resonant circuit operating at 125 khz. 6. dcr measured on micro-ohmmeter. 7. srf measured using agilent/hp 8753d network analyzer. 8. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
document 311-2 rfid transponder coils C 5315tc dimensions typical l vs frequency 0 2 4 6 8 10 14 12 10 10 01 00 01 00 0 0 i nduc ta nc e( mh ) fr e que nc y( khz) -404 -115 -415 -725 0.10 0.002 2,54 0,05 0.10 2,54 0.33 8,38 0.56 14,22 0.16 4,06 0.12 3,05 0.32 8,13 recommended land p attern 0.536 13,61 0.15 3,81 0.089 2,26 max unless specified, toler ance is 0.010 (0,25). xxx document 311-2 revised 02/19/09 dimensions are in inches mm terminations rohs compliant gold over nickel over phos bronze . weight 260 C 300 mg ambient temperature C40c to +125c storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) temperature coeffcient of inductance +300 to +1100 ppm/c failures in time (fit) / mean time between failures (mtbf) one per billion hours / one billion hours, calculated per telcordia sr-332 packaging 3000 per 13 f reel plastic tape: 24 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.74 mm pocket depth pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2013 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
